How To Apply Water$ave Plug or Seep

Polymer Innovations Water$ave Plug & Seep is a do it yourself dam, pond or earthen water catchment sealer.

It is specifically designed to be a cost effective & simple application that can be applied by all walks of life all over the world.

Enabling people to save precious water & money for families, farms, schools, parks, golf clubs, mines & many other industries worldwide.

So what is involved?
All you need to do is remove any impediments for the polymer to get to the leak such as leaf litter or livestock beforehand.
A fine day with little to no wind or rain & a small boat if you have a large dam.

A pair of gloves, sunglasses, hat & wet weather gear is recommended depending on local conditions & maybe a friend to help or just watch you do it & take photos!

Do it yourself is great if the product works & operates as it is designed to do.
It needs to be a product that will work the first time, most of the time & not cost you extra stress or heartbreak from a failed DIY project.

Water$ave Plug & Seep enjoy a very high success rate of do it yourself polymer dam sealing.
Our testimonials are an excellent indication to others of the effectiveness of this premium world class polymer product.
Click here to read do it yourself Water$ave PL Plug testimonials.

If you have a leaking dam or pond & need to seal it.
Below is a step by step guide of what to consider when applying Water$ave Plug or Seep.

How To Apply Water$ave Plug or Seep

• If your dam has water in it & is currently leaking then now would be the best time to apply.
  The pressure of the water leakage creates the suction needed to draw the hydrating polymers into the problem areas & seal the leaks.
  
• If you do not have any water in your dam yet.
  You can apply Water$ave Plug/Seep as your dam is filling up after rain, this ensures a neat & even coverage.
  
• If you know where the leak is then you can concentrate your application to that area.
  It is also recommended that the rest of the dam be treated as well & this can be done when the dam is full or is at least above the problem area.
  
• For a fast leak. Apply at 100gm/m² .
  A fast leak is a noticeable reduction over days & weeks.
   
• For a slow leak. Apply at 75gm/m². 
  A slow leak is a noticeable reduction over months.
  
  
• Remove any deep silt, livestock & dense reeds.
  They can impede the polymers ability to get to the outflows.
  
• Just sprinkle over the surface of the water.
  On a quiet day with no wind or rain & when the dam is not overflowing.
  
• Distribute it as if you are 'feeding the chickens'.
  At the recommended rates.
  
  
• Cast out gently no more than 1.5m.
  By hand, scoop or fertiliser spreader from a small dinghy for best results.
   
• Be careful not to separate the blend.
  Or go through the polymer while applying to the water surface.
   
• A boat is recommended.
  To make sure that the application is spread evenly all over the dam without separating the blend.
  
• Allow 12 - 48hrs.
  To hydrate, expand & sink towards the outflows.
   
• Then allow 2 - 10 days.Depending on the rate of leak for the polymers to start incorporating into the soil structures.

Water$ave Plug or Seep Application - Short Video

• For more information.
  Please visit our 'Water$ave Plug & Seep FAQ' page.

• You can work out how much product you need.
  By using our online 'Water$ave Plug & Seep Polymer Calculator'.